1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

(a) Using a jack, slowly raise the rear differential carrier assembly to its installation position.

(b) Temporarily install the 6 bolts.

(c) Tighten the 4 bolts in order, from A to D.

Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)

Using hexagon wrench, tighten the 2 bolts order, E to F.

Torque: 200 N·m (2039 kgf·cm, 148 ft·lbf)

2. INSTALL REAR DRIVE SHAFT ASSEMBLY LH

3. INSTALL REAR DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.

4. INSTALL PROPELLER SHAFT ASSEMBLY (for 4WD)

5. INSTALL PROPELLER SHAFT ASSEMBLY (for 2WD)

7. INSPECT FOR OIL LEAK